For many years there seemed to be just one single dependable option to keep data on a pc – using a disk drive (HDD). Nonetheless, this sort of technology is currently demonstrating its age – hard drives are actually noisy and slow; they can be power–hungry and tend to produce quite a lot of warmth throughout intense operations.

SSD drives, on the contrary, are fast, use up a smaller amount energy and are much cooler. They feature an innovative solution to file access and data storage and are years in front of HDDs when considering file read/write speed, I/O effectiveness as well as energy effectivity. Observe how HDDs stand up against the modern SSD drives.

1. Access Time

After the launch of SSD drives, file accessibility rates are now through the roof. With thanks to the completely new electronic interfaces found in SSD drives, the standard data access time has shrunk to a record low of 0.1millisecond.

HDD drives even now make use of the exact same general data file access technique which was actually developed in the 1950s. Despite the fact that it has been noticeably upgraded since then, it’s sluggish compared with what SSDs will provide. HDD drives’ data file access rate ranges somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

The random I/O performance is vital for the operation of any data file storage device. We’ve carried out detailed exams and have identified an SSD can deal with at the very least 6000 IO’s per second.

Over the exact same tests, the HDD drives demonstrated to be considerably slower, with only 400 IO operations managed per second. While this might appear to be a large number, for those who have an overloaded web server that contains plenty of well–liked websites, a slow hard disk drive could lead to slow–loading web sites.

3. Reliability

SSD drives are made to have as fewer rotating components as possible. They use an identical technology to the one employed in flash drives and are significantly more efficient when compared with conventional HDD drives.

SSDs have an typical failing rate of 0.5%.

With an HDD drive to work, it has to rotate 2 metal hard disks at more than 7200 rpm, keeping them magnetically stabilized in the air. There is a number of moving components, motors, magnets and also other devices crammed in a tiny space. Hence it’s no surprise the average rate of failing of the HDD drive can vary among 2% and 5%.

4. Energy Conservation

SSD drives are considerably small compared to HDD drives as well as they don’t have any kind of moving components whatsoever. It means that they don’t create so much heat and require much less electricity to function and fewer power for chilling reasons.

SSDs take in between 2 and 5 watts.

From the moment they were created, HDDs have been extremely electrical power–greedy systems. So when you have a hosting server with many different HDD drives, this will certainly boost the month to month electric bill.

Normally, HDDs use up somewhere between 6 and 15 watts.

5. CPU Power

SSD drives allow for swifter file access speeds, that, in turn, allow the CPU to perform data file queries faster and to return to different responsibilities.

The average I/O hold out for SSD drives is only 1%.

HDD drives allow for reduced accessibility rates compared to SSDs do, resulting for the CPU required to hang on, while saving allocations for your HDD to discover and give back the inquired data file.

The normal I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

In the real world, SSDs operate as wonderfully as they performed for the duration of the testing. We competed a complete platform back–up on one of our production servers. All through the backup procedure, the typical service time for I/O queries was basically under 20 ms.

During the identical trials using the same web server, now suited out with HDDs, efficiency was substantially slow. During the hosting server back up procedure, the average service time for any I/O calls ranged between 400 and 500 ms.

7. Backup Rates

Talking about back ups and SSDs – we have discovered a great advancement with the backup rate since we turned to SSDs. Now, a common web server data backup will take simply 6 hours.

Alternatively, with a web server with HDD drives, a similar backup takes 3 to 4 times as long to finish. An entire back up of an HDD–powered hosting server usually takes 20 to 24 hours.

Should you wish to immediately improve the overall effectiveness of your websites with no need to adjust any kind of code, an SSD–powered website hosting service is a really good solution. Look at our cloud website hosting plans packages and also the VPS plans – our solutions offer really fast SSD drives and are offered at reasonable prices.


  • Service guarantees

  •  
  • Sign up today. There are no installation fees and you will have complete root/administrator access to the server. 99.9% network uptime is warranted.
  • Compare our prices

  •  
  • Effortlessly examine the allocations and capabilities provided by our Virtual Private Servers. Find exactly which VPS setup will provide you with precisely what you will need to manage your dynamic online presence with ease.
  • Compare our hosting plans
  • Contact Us

  •  
  • We are online for you 24 hours to reply to all questions about our VPS platform. 60–min reply time warranty.